Looking for help with the Windows “blue screen of death”? This page is only a blue color. For a crash screen: write down the stop code (e.g. CRITICAL_PROCESS_DIED), restart, and undo whatever changed last — a new driver, update or piece of hardware. If Windows won’t start normally, use Safe Mode from the recovery screen (Troubleshoot → Advanced options → Startup Settings). Then run sfc /scannow in an administrator Terminal and Windows Memory Diagnostic to check system files and RAM. Searching the stop code on Microsoft’s support site gives the specific fix. On recent Windows 11 versions, the same error screen is black rather than blue.
Testing blue subpixels
Blue is the subpixel color you can least afford to test on white. It contributes only about 7% of a white pixel’s brightness, so a dead blue subpixel barely changes a white screen — it just looks very slightly yellow. On a fullscreen blue, the same defect is an obvious black dot.
- Press F or click the blue. On iPhone, add the page to your home screen and open it from there to cover the whole display.
- Scan in rows from top to bottom at a normal distance, then up close. On phones and high-resolution laptops use a magnifier or your phone camera’s zoom — individual subpixels are tiny.
- Check suspects on the other primaries. Look at the same spot on the red screen and green screen, then mark it with the dead pixel test. A stuck subpixel may come back with the stuck pixel fixer.
Blue and OLED wear
On OLED screens, blue subpixels typically age fastest, which is why manufacturers often make them larger than red and green. Uneven wear — from a status bar, navigation bar or channel logo left on screen — can show as a faint darker or tinted outline on a solid color. Go fullscreen on blue, then on gray, and look where static elements usually sit. The burn-in test explains how to tell permanent burn-in from temporary image retention.
Using a screen as a blue chroma key backdrop
Choose Chroma key (2) when filming a screen as a small blue backdrop, for example behind a product or a webcam subject who is wearing green. Keep the subject in front of the screen with its own light, expose so the blue isn’t clipped, focus on the subject so the pixel grid blurs, and angle the screen to avoid reflections. Blue needs more light than green to key cleanly, because camera sensors are less sensitive to blue and record it with more noise.
| Pure blue | Chroma key blue | |
|---|---|---|
| Value | #0000FF · RGB 0, 0, 255 | #0047BB · RGB 0, 71, 187 |
| Best for | Testing blue subpixels and uniformity | Filming the screen as a backdrop |
On some screens pure blue looks slightly violet, and on wide-gamut displays it can look deeper than on a standard monitor. Both are normal. To fill the screen with any other shade, use the any color screen.
Frequently asked questions
Is this the Blue Screen of Death?
No. This page is just a solid blue color for testing screens and for chroma key; it can’t cause or fix a Windows crash. If Windows showed a crash screen, note the stop code and see the short troubleshooting list on this page.
What is the hex code for chroma key blue?
The shade commonly used for blue chroma key backdrops is close to #0047BB (RGB 0, 71, 187). Pure screen blue is #0000FF.
Why does blue look so much darker than red or green?
Our eyes are least sensitive to blue. In the standard sRGB formula, full blue provides only about 7% of white’s luminance, compared with about 21% for red and 72% for green — so pure blue looks deep and dark even at full power.
How do I find a dead blue subpixel?
Show pure blue fullscreen and look for black dots. On white, a dead blue subpixel is almost invisible — it only gives a faint yellowish tint — so testing on blue itself is the only reliable way. A stuck red or green subpixel shows as a pink or cyan dot on blue.
When should I use blue instead of green for chroma key?
When the subject is wearing or holding something green, when it has fine blond or green-tinged hair that keys poorly on green, or for night scenes where blue spill on edges is less noticeable. Green is the default because cameras capture it with more detail and less noise.
Last updated . Runs entirely in your browser — nothing is uploaded.