How to run the HDR test
- Turn on HDR first (see how to enable HDR below). Macs with XDR or HDR screens, iPhones, iPads and Android phones with HDR screens switch automatically when HDR content appears.
- Check the results under the test. They come straight from your browser and update live if you turn HDR on or off.
- Look at the brightness ladder. The first tile is ordinary page white. The others are real HDR images encoded at 100 to 10,000 nits. With HDR working, tiles above about 203 nits glow noticeably brighter than the SDR white tile, up to the point where your screen runs out of brightness.
- Switch to Clipping (2). Each tile has a 10,000-nit square in the middle of a dimmer surround. Where the screen can still get brighter than the surround, you see the square; once the surround reaches your screen’s limit, the square disappears.
- Play the HDR video (3) in fullscreen. The sun and the 1,000 and 4,000-nit bars should be clearly brighter than the white reference square, and the stars should sparkle rather than look gray.
What you should see
| What you see | What it means |
|---|---|
| Tiles get brighter than SDR white, then stop at some point | HDR is working. Where they stop is roughly your screen’s peak brightness for a small area in the current mode. |
| Every tile from 203 nits up looks like the same flat white | The browser is tone-mapping HDR to SDR. HDR is off, unsupported on this display, or the browser doesn’t support HDR images. |
| All tiles, including SDR white, look dim and grayish | HDR is on and the SDR content brightness is set low, or the screen is in a power-saving mode. Normal; raise the SDR brightness slider. |
| Ladder looks right but the video looks flat | HDR images and HDR video take different paths in the browser. Try fullscreen, another browser, or check that hardware acceleration is on. |
| Colors in the video look strange: purple, green, very dark | The browser decoded the 10-bit video but didn’t handle its PQ/BT.2020 color correctly. Update the browser and graphics driver. |
On an LCD with local dimming, the bright tiles may also lift the black around them (blooming); our blooming test looks at that on its own. OLEDs usually reach their full peak only on small areas, so a full row of very bright tiles can look dimmer than a single one.
Understanding nits and the PQ curve
HDR video and images use the PQ (perceptual quantizer, SMPTE ST 2084) curve. Unlike SDR, where “white” is simply as bright as the screen is set, every PQ value means an absolute brightness, from 0 to 10,000 nits (cd/m²). About half of the signal range is spent below 100 nits, because that’s where your eyes are most sensitive to small steps.
No screen shows 10,000 nits. Each display tone-maps content above its own limit: some clip hard (everything above the peak becomes the same white — the clipping tiles show this clearly), others roll off gradually so very bright detail is compressed rather than lost (the squares fade instead of vanishing). Many TVs also adjust per scene. That’s why this test shows where highlights stop, not an exact number.
Where SDR white lands on the ladder depends on your system. On Windows it follows the SDR content brightness slider; on a Mac, SDR white follows the brightness slider and HDR highlights use the extra headroom above it, which shrinks as you turn brightness up.
How to turn on HDR
Windows 11
- Settings → System → Display → select the HDR screen → turn on Use HDR. (Windows 10: Settings → System → Display → Windows HD Color settings → Play HDR games and apps.)
- Under the HDR settings, adjust SDR content brightness so normal apps look comfortable, and turn on Stream HDR video if offered.
- Install the free Windows HDR Calibration app from the Microsoft Store and run it once. It sets your screen’s real peak and black level, which games and apps use for tone mapping.
- In the monitor’s own menu, make sure HDR mode isn’t disabled and the input is DisplayPort or HDMI 2.0 or later.
Mac
There is no switch for the built-in screen: MacBook Pro models with a Liquid Retina XDR display and the Pro Display XDR show HDR automatically in Safari, Chrome, QuickTime and Photos. For an external HDR monitor, open System Settings → Displays, select it and turn on High Dynamic Range. On a MacBook, the battery setting Optimize video streaming while on battery can play HDR video in SDR to save power.
iPhone and iPad
Automatic on models with an HDR display in Safari and other apps. Low brightness and Low Power Mode reduce how much brighter highlights can go. In recent iOS versions, the View Full HDR switch in Settings → Photos controls HDR photos in the Photos app.
Android
Automatic on phones with HDR screens in Chrome and video apps. Some phones dim HDR when the battery is low or the phone is warm. On Samsung phones, Settings → Advanced features → Video brightness affects how video is shown.
TVs
HDR is enabled per HDMI input: Samsung Input Signal Plus, LG HDMI Ultra HD Deep Colour, Sony HDMI signal format: Enhanced. Most smart-TV web browsers can’t play HDR video, so test HDR on a TV with its built-in streaming apps, or connect a computer or console with HDR enabled and open this page there.
Browser support for HDR
| Browser | HDR video | HDR images (AVIF) |
|---|---|---|
| Chrome / Edge | Yes on Windows, macOS, ChromeOS and Android with HDR displays | Yes |
| Safari | Yes on macOS, iOS and iPadOS (HEVC) | Recent versions |
| Firefox | macOS only | Shown in SDR |
The test video is HDR10-style content: HEVC Main 10 in MP4 for Safari and devices with HEVC decoding, and VP9 Profile 2 in WebM for everything else, both with PQ transfer and BT.2020 color. The brightness ladder uses 10-bit AVIF images with the same PQ/BT.2020 signaling, so nothing in this test is simulated: if your screen shows HDR anywhere, it should show it here. Wide color goes hand in hand with HDR; check it separately with the color gamut test, and if you see stepping in dark HDR scenes, the banding test explains why.
The detection results are what your browser reports, not a measurement. “HDR display: yes” means the operating system says the screen is in HDR mode. It says nothing about how bright it gets or how well it handles HDR — use the ladder and clipping tiles for that, and measured reviews for exact numbers.
When HDR is disappointing
- Highlights barely brighter than white: the screen’s peak brightness is low (common on DisplayHDR 400 monitors and many laptops), or the SDR brightness slider is set near the panel’s maximum, leaving no headroom.
- Everything looks dim in HDR mode: HDR modes often lock the backlight; raise SDR content brightness, and turn off energy-saving or ambient light options in the monitor menu.
- Glowing halos around bright objects: local dimming zones on LCDs. Try a different local dimming level, or check with the blooming test.
- Clipped bright detail: run the Windows HDR Calibration app, or on a TV use the HDR tone-mapping or “dynamic tone mapping” option; the clipping tiles here show the difference.
Frequently asked questions
How do I know if HDR is working?
Look at the results under the test and at the brightness ladder. If “HDR display” says yes and the tiles keep getting brighter than the SDR white tile as you go up the ladder, HDR is working. If every tile from about 203 nits upward looks the same flat white, the browser is showing the HDR content in SDR.
Can this test measure my screen’s peak brightness in nits?
No. A browser has no way to measure light; only a colorimeter or spectrometer can. The clipping tiles show roughly where your screen stops getting brighter, but tone mapping, local dimming and the operating system’s brightness settings all shift that point. For real numbers, look for independent reviews that measure peak brightness on a 2–10% window.
Why does HDR make my screen look washed out on Windows?
With HDR on, Windows shows ordinary SDR apps inside the HDR signal at the level set by the SDR content brightness slider, and many monitors look flatter in that mode. That’s expected. Adjust the slider under Settings → System → Display → HDR, run the Windows HDR Calibration app, or leave HDR off and turn it on only for HDR games and video.
Why does the HDR video look dim or flat?
Your browser is probably tone-mapping it to SDR, either because HDR is off in the operating system, the browser doesn’t support HDR video on your platform, or the window is on an SDR display. Turn on HDR, use Chrome, Edge or Safari, and play it in fullscreen.
Is HDR400 real HDR?
It meets the lowest VESA DisplayHDR tier: at least 400 nits peak, with no requirement for local dimming. Many HDR400 monitors can accept an HDR signal but can’t show much brighter highlights or deeper blacks than in SDR, so the effect is modest. DisplayHDR 600 and up, OLED (True Black) tiers, and screens with full-array local dimming make a bigger difference.
Does HDR work in Firefox?
Only partly. Firefox supports HDR video on macOS but not, at the time of writing, on Windows, and it shows HDR images in SDR. Chrome, Edge and Safari are the best choice for HDR on the web.
What’s the difference between HDR10, HDR10+, Dolby Vision and HLG?
HDR10 is the baseline format: PQ brightness curve, 10-bit color and one set of brightness metadata for the whole video. HDR10+ and Dolby Vision add scene-by-scene metadata so the display can tone-map each scene better. HLG is a broadcast format that works without metadata and degrades gracefully on SDR TVs. This page uses HDR10-style PQ content, which every HDR display supports.
Last updated . Runs entirely in your browser — nothing is uploaded.