Gray Screen

Fullscreen gray at any shade, with presets for 5%, 10%, 25%, 50% and 75% gray and an 18% gray card. Click the gray or press F.

Click for fullscreen · ← → presets · ↑ ↓ shade · A adjust · Esc exitTap for fullscreenTap to show controls

#808080

Which gray to use

“Percent gray” here means the signal level, the convention used by test patterns and image editors: 50% gray is #808080. Because of gamma, the light a shade emits is much lower than its percentage — the luminance column shows how much of full white’s light each shade produces.

ShadeHexRGBLuminanceBest for
5%#0D0D0D130.4%Near-black uniformity, OLED vertical banding, dark-scene dirty screen effect
10%#1A1A1A261.0%Clouding and flashlighting on LCDs, dark-gray tint on OLED
25%#404040645.1%Burn-in and image retention, overall uniformity
18% card#77777711918.4%Photographic middle gray; neutral editing background
50%#80808012821.6%Dirty screen effect, vignetting, burn-in, color tint
75%#BFBFBF19152%Tint shifts across the screen, light-gray uniformity

Checking screen uniformity with gray

A uniform gray is the hardest thing for a display to show perfectly, which makes it the best way to see how even your panel is.

  1. Let the screen warm up for 20–30 minutes and darken the room. Cold panels and room reflections both make uniformity look worse than it is.
  2. Sit centered at your normal distance and keep your head still. On IPS and VA panels, looking at the edges from an angle darkens or tints them by itself.
  3. Start at 50%, then 10% and 5%. Look for darker corners (vignetting), cloudy patches, a grid or vertical stripes, and a tint that changes from one side to the other.
  4. Pan your eyes, not the picture. The dirty screen effect is easiest to notice when something moves across the screen; if you only see it while staring at a still gray field, it is unlikely to bother you in normal use.

Phone photos exaggerate unevenness, especially at high exposure. If you want to document a problem for a return, lock the exposure so the photo looks like what you see. The gray uniformity test adds a zone grid and more levels; for dark edges and corners on black use the backlight bleed test.

Spotting burn-in and image retention

On OLED phones, monitors and TVs, a medium gray (25–50%) is where worn areas show: a faint outline of the taskbar, navigation bar, keyboard, channel logos or a game HUD that is slightly darker or tinted. Go fullscreen so no static element of your own is on screen, and step between 25% and 50%. If you see an outline, check whether it fades after a few minutes of varied content — that would be temporary image retention rather than permanent burn-in. The burn-in test covers what to do next.

The 18% gray card and middle gray

Photographers use an 18% gray card as a reference for exposure and white balance. It reflects 18% of the light that hits it, which our eyes see as roughly halfway between black and white (CIE lightness L* 50). On an sRGB screen the same middle gray is #777777 (RGB 119), which emits 18.4% of white’s light. That is why it sits just below 50% gray (#808080, L* 54) rather than at 18% of the 0–255 scale.

A neutral middle gray is also a good background for editing photos: unlike white or black, it doesn’t make the image around it look darker or brighter than it is. If the gray card preset looks tinted, your display’s white balance isn’t neutral; see the color accuracy test.

How the shade slider works

The slider changes the gray in equal perceptual steps, so 40% → 50% looks like as much of a change as 80% → 90%. The readout shows four numbers for the current shade: the hex code and RGB value you’d type into an app, the luminance (share of full white’s light) and L*, the lightness your eye perceives. Your last setting isn’t kept — the page always opens at 50% gray.

For darker tests go to the black screen, which has 1%, 2% and 5% near-black presets; for lighter ones use the white screen.

Frequently asked questions

What is 50% gray in hex and RGB?

50% gray is #808080, or RGB 128, 128, 128 — halfway along the 0–255 scale. Because screens apply gamma, it emits only about 22% of the light of full white, but it looks roughly halfway between black and white.

What is 18% gray in RGB?

An 18% gray card reflects 18% of the light that hits it. On a screen, 18% of white’s light (in the standard sRGB color space) is RGB 119, 119, 119, or #777777. It is not #2E2E2E (18% of 255) — that would look much darker than a gray card.

Why does the gray screen look patchy or dirty?

That is called the dirty screen effect (DSE) or clouding: small variations in the backlight or panel make some areas slightly lighter or darker. Some is normal on every LCD and OLED, especially at 5–10% gray in a dark room. It only matters if you notice it in normal content, typically in sports when the camera pans across grass or ice.

Why does the gray look slightly pink, green or blue?

A gray screen should look neutral. A tint means the display’s white balance is off (color temperature preset, Night Light, True Tone) or, if it varies across the screen, that the panel isn’t uniform. Try the monitor’s 6500 K or “sRGB” preset, then see the monitor calibration guide.

What do the vertical bands on 5% gray mean?

Faint vertical stripes on very dark gray are common on OLED TVs and monitors and on some LCDs. They come from tiny differences between columns of pixels and are usually only visible on uniform near-black fields. Some OLED TVs reduce them after a pixel refresh (often run automatically in standby).

Can I choose any shade of gray?

Yes. Drag the Shade slider from 1% to 99%, or press ↑ ↓ for 5% steps and Shift+↑ ↓ for 1% steps. The readout under the screen shows the exact hex code, RGB value, luminance and CIE L* lightness.

Last updated . Runs entirely in your browser — nothing is uploaded.