Red light for night vision
A dim red screen is the classic way to keep your night vision while stargazing, camping, checking on a sleeping baby or reading a star chart at the telescope. Set it up before you go out:
- Turn the device brightness all the way down first. The screen’s backlight sets the ceiling; this page can only dim from there.
- Pick Night or Night dim (keys 3 and 4), then press ↓ until the screen is just bright enough to see by. Shift+↓ steps 1% at a time.
- Go fullscreen so no white browser bars remain. On iPhone, add the page to your home screen (Share → Add to Home Screen) and open it from there — Safari’s toolbars are bright and can’t be hidden otherwise.
- Keep it out of your direct line of sight and let your eyes adapt for 20–30 minutes. A single glance at a white screen undoes much of that.
The page keeps the screen awake while fullscreen, so it won’t time out and greet you with a bright lock screen. If you turn on the clock or timer overlay, its digits are drawn in a slightly brighter red, never white.
A screen is not a darkroom safelight. Its red is not filtered to the narrow band that photographic paper ignores, so don’t use it with light-sensitive materials.
Testing red subpixels
Every pixel on an LCD and most OLEDs is built from red, green and blue subpixels. Pure red (#FF0000) switches on only the red ones, which makes problems with them, or with the other two colors, stand out.
Go fullscreen, then scan the screen in rows from a normal distance and again up close. Subpixels are small: on a phone or a high-resolution laptop you’ll need a magnifying glass or your phone camera zoomed in to see individual dots. Anything suspicious? Check the same spot on green and blue, then run the dead pixel test to mark its position. Stuck (lit) subpixels can sometimes be revived with the stuck pixel fixer; dead ones can’t.
What else to look for on red
- Uneven red: a red field that turns orange toward one side, or darker toward the corners, points to backlight or panel uniformity issues. Look straight on — viewing at an angle changes the shade on IPS and VA panels.
- Orange-looking red: if pure red looks orange next to another screen, a warm color mode or a low-saturation picture mode may be active; switch the display to its standard or sRGB mode to compare fairly.
- Very deep red: on wide-gamut screens (many OLED phones, some monitors), red can look more saturated than on a typical sRGB monitor. That is expected, not a defect; the color gamut test shows what your screen supports.
Need another color? The any color screen takes any hex or RGB value — an amber like #FF8000 is a common alternative for a night light.
Frequently asked questions
Why do astronomers use red light?
Night vision relies on the rod cells in your eyes, which take 20–30 minutes to fully adapt to the dark and are relatively insensitive to deep red light. Dim red light lets you read a chart or see your gear while disturbing that adaptation much less than white light would. The key word is dim: even red light ruins night vision if it is bright.
How do I make the red screen dimmer?
Pick Night dim or drag the Brightness slider toward 1%, and turn your device’s own brightness to minimum — the slider can only reduce the signal, not the backlight. On iPhone, Settings → Accessibility → Display & Text Size → Reduce White Point lowers the maximum brightness further.
How do I check for a dead red subpixel?
Show pure red fullscreen and scan the screen slowly. A dead red subpixel is a black dot on red (and a cyan-ish dot on white). A stuck green or blue subpixel in a pixel shows as a yellow or pink dot. Use a magnifier or your phone camera’s zoom to look closely.
Can I make my whole iPhone red, not just this page?
Yes. Settings → Accessibility → Display & Text Size → Color Filters → turn on Color Tint, set Hue all the way to red and Intensity to maximum. Add it to the Accessibility Shortcut (triple-click the side button) to switch it on and off quickly at night.
Is red light better than white before bed?
Light with less blue in it generally interferes less with your body clock than bright white or bluish light, and dimmer is always better. A dim red screen is a gentler night light than a white one, but it is still light — the screen off is better than any color.
Last updated . Runs entirely in your browser — nothing is uploaded.