How to run the viewing angle test
- Set up. Turn off night light / Night Shift and HDR, reset browser zoom (Ctrl+0), and dim the room a little. Go fullscreen so the pattern reaches the edges.
- Sit centered. Put your eyes level with the middle of the screen at your normal distance.
- Gamma word: each band hides a word drawn in a solid gray that matches the average brightness of the fine stripes around it. Head-on, the words should be faint or invisible. Move slowly sideways, then up and down — the words appear when the panel’s gamma shifts with angle.
- Purple, Colors and Gray steps: look for colors turning paler, darker or changing hue, and for dark gray steps merging or lifting, as you move.
- Black: in a dark room, look at the corners from an angle. A glow that changes as you move is IPS glow; a fixed bright patch is backlight bleed.
Test vertical angles too: lean back in your chair and look from slightly above, then from below. TN panels give themselves away instantly this way.
Why the gamma word works
The stripes alternate between two levels, for example black and white. Their average light output is fixed by the two extremes. The word is a solid gray picked so its light output matches that average on a screen with standard (sRGB) gamma — for black and white that is sRGB 188, not 128, because screen brightness is not linear. When you view an LCD from an angle, mid-tones shift much more than full black and full white, so the solid gray drifts lighter or darker than the stripes and the word appears.
If the words are clearly visible even head-on, your gamma is off or the screen is scaling the pattern (it must be shown at 1:1 pixels — check the text clarity test). The gamma test tells you which way.
What “sitting straight” really means
You never see a whole screen head-on. The edges are always at an angle, and the closer and wider the screen, the bigger that angle. A useful rule: at a distance equal to the screen diagonal, the left and right edges of a 16:9 screen are about 24° off-axis and the corners about 27°.
That is why a large VA monitor can look lighter at the sides with nobody moving, and why curved screens suit VA panels: the curve keeps the edges closer to head-on. On an IPS or OLED screen the edge angle barely matters.
IPS vs VA vs TN vs OLED
| IPS | VA | TN | OLED | |
|---|---|---|---|---|
| Gamma word off-axis | Appears only at wide angles | Appears at modest side angles | Appears with small vertical moves | Barely appears |
| Colors from the side | Stable | Wash out, some hue shift | Shift strongly, worst vertically | Very stable; slight tint at steep angles |
| Dark grays | Stable, lifted by glow in the dark | Crushed head-on, lift off-axis | Darken or invert from below | Stable |
| Black in a dark room | Gray, glows at an angle | Deep head-on, gray at an angle | Gray | True black from any angle |
| Typical native contrast | About 1000:1 | About 3000:1 or higher | About 1000:1 | Effectively infinite |
| Best for | Color work, wide viewing, multiple viewers | Movies and dark rooms, single centered viewer | Budget and fast esports models | Everything, with burn-in care |
Typical behavior; individual models vary. Newer “fast IPS” and premium VA panels narrow some gaps.
Reading each pattern
- Purple mixes red and blue at different levels, so a gamma shift in either channel changes its hue. It should look the same purple from every direction. VA panels tend to turn it paler from the side; TN panels make it darker or bluer from below.
- Colors show saturation loss — a red or skin tone that turns pale, orange or pink from the side means color work should be done head-on only.
- Gray steps (full range on top, near-black below) show gamma shift most clearly. On VA, the first few near-black steps often merge head-on and separate when you move to the side; that is “black crush”, also visible in our brightness test.
- Black reveals IPS glow and VA off-axis graying in a dark room. Glow is normal for IPS; a bright patch that stays put when you move is backlight bleed instead.
Is it a defect?
Viewing angle behavior is a property of the panel technology, so every unit of the same model behaves the same way, and it is not covered by warranty. It is worth returning a monitor only if it is clearly worse than reviews of the same model, or if one side shifts much more than the other — that can point to a misaligned or stressed panel. Uneven glow or bleed is a different question; see the backlight bleed test.
Frequently asked questions
How do I test my monitor’s viewing angles?
Open the Gamma word view in fullscreen, sit centered at your normal distance, and confirm the words are nearly invisible. Then move your head slowly left, right, up and down. The angle at which the words appear, and how strongly, tells you how stable the panel is. Repeat with the purple, colors and gray steps views.
What does 178° viewing angle mean?
It is the angle at which contrast drops to a set ratio — usually 10:1 (sometimes 5:1). It says nothing about how much color or gamma shifts before that, which is why IPS, VA and even some TN panels can all claim 178° while looking very different off-axis.
How can I tell if my monitor is IPS, VA, TN or OLED?
Use the viewing angle views. TN changes dramatically when you move your head vertically — from below the image darkens or inverts. VA keeps saturated colors but washes out dark and mid grays from the side, and dark detail in the center of the screen can look crushed. IPS keeps colors and grays stable but blacks glow from an angle in a dark room. OLED barely changes at all and its black stays black.
Why does the edge of my screen look different from the center?
Because you see the edges at an angle even when you sit straight in front of the screen. At a distance equal to the screen diagonal, the left and right edges of a 16:9 screen are about 24° off-axis. On VA and TN panels that is enough to shift gamma, so the edges look lighter or darker than the center. Sitting farther back, or using a curved screen, reduces it.
What is IPS glow?
A gray, silver or slightly colored sheen on dark content that appears in the corners of IPS screens when you view them at an angle. It moves and changes as you move your head, which is how you tell it apart from backlight bleed. Use the Black view, or our backlight bleed test for a full check.
Do OLED screens have perfect viewing angles?
Nearly. Brightness and color hold up far better than on any LCD, and black stays black from every angle. At steep angles some OLEDs show a slight color tint — often a pink, green or blue cast on white — and some lose a little brightness. It is rarely noticeable in normal use.
Last updated . Runs entirely in your browser — nothing is uploaded.