How to run the gamma test
- Reset zoom to 100%. Press Ctrl+0 (⌘+0 on a Mac). Each line in the pattern must be exactly one screen pixel tall; the test shows a warning under the pattern if it can’t be.
- Use your normal picture settings. Test the picture mode you actually use, at your usual brightness, after the screen has been on for 15–30 minutes.
- Sit back or squint. From about two or three times your normal distance, the fine lines in each column blur into one flat tone. Look straight at the middle of the screen.
- Read the chart. In each column, find where the solid middle strip disappears into the lines and read the number on the scale at that height. Fullscreen (F) gives a taller, easier-to-read scale.
- Fine-tune with Match. Press 2 or choose Match. Drag across the pattern (or use ← → or the slider) until the square vanishes into the lines. The readout is your gamma. Press ↑ ↓ or the tone button to measure the other tones and channels; results collect under the pattern.
How the test works
Each column is made of alternating lines: one fully lit, one black. Because exactly half the pixels are lit, the lines always give off exactly half the light of a solid area at full level — whatever your display does. The solid strip in the middle steps through levels that would give that same half-light on displays with gamma 1.6 up to 3.0. Your eye is the meter: where strip and lines look identical, the display’s gamma matches the scale.
The 50%, 25% and 10% columns use bright lines at levels 255, 186 and 122 so the comparison happens in highlights, mid-tones and shadows. The R, G and B columns do the same with one color channel at a time.
Reading your result
| Your reading | What it means | What you see in pictures |
|---|---|---|
| Below 2.0 | Gamma too low | Flat, washed-out image, gray-looking shadows, weak colors |
| 2.1–2.3 | On target for sRGB, Windows, macOS and the web | Content looks as its creators intended |
| 2.3–2.5 | Slightly high; 2.4 is the target for film in a dark room | Richer, deeper shadows; may look dark in a bright room |
| Above 2.5 | Gamma too high | Heavy, contrasty image; shadow detail disappears into black |
Here is what those errors do to an even 11-step gray scale. The rows are simulated, so they show the effect as your own screen would render it:
When the columns disagree
- The 10% column reads much lower than 50% (for example 1.8 vs 2.2): something is lifting the shadows — a shadow-boost or black equalizer feature, dynamic contrast, or the monitor’s Brightness set too high. Compare with the brightness test.
- One color column reads differently from the others (R 2.4, G 2.2, B 2.0): the color channels have different curves, so grays take on a tint that changes with brightness — warm in the shadows and cool in the highlights, for example. A colorimeter calibration fixes this properly; by eye, try the monitor’s other gamma presets or color temperature settings.
- The reading changes as you move your head up and down: normal for TN and VA panels and many laptops. Read the chart straight-on, at eye level. The viewing angle test shows how strong the effect is on your screen.
How to fix gamma
1. Monitor menu (best)
Changing gamma in the monitor itself keeps all 256 levels of every channel, so it causes no banding. Open the on-screen menu with the buttons or joystick on the monitor and look for:
- Gamma — usually under Picture, Image or Color. Choose 2.2. Some brands use numbered modes (for example Gamma 1–5); check the manual for which one is 2.2, or try each and re-test.
- Picture mode — sRGB, Standard or Custom/User modes usually track 2.2. Game, FPS, RTS and Movie presets often lift shadows or add contrast.
- Shadow-lifting features — Black Equalizer (Samsung, BenQ, Gigabyte), Black Stabilizer (LG), Shadow Boost (ASUS), Dark Stabilizer (Dell), Night Vision (MSI). They make dark areas brighter by lowering gamma in the shadows. Turn them off unless you want that effect in a game.
- Dynamic contrast, ECO and ambient light sensor modes — they change the tone curve with the picture content. Turn them off for an honest reading.
2. Graphics driver and operating system
- NVIDIA: NVIDIA Control Panel → Display → Adjust desktop color settings. Gamma should be at 1.00 (the default) unless you are deliberately correcting the monitor.
- AMD: AMD Software → Settings → Display → Custom Color; leave it off or at default values.
- Windows: run
dccw(search “Calibrate display color”) for a gamma slider. It works through the graphics card’s lookup table, which can add slight banding — use it only when the monitor has no gamma setting. Our monitor calibration guide walks through it. - macOS: System Settings → Displays → Color profile. Apple displays are factory-set to their own profile; for external monitors, a profile made with a colorimeter is the reliable way to correct gamma.
3. TVs
TV gamma settings are usually in Picture → Expert settings. Some TVs give numeric values (2.2, 2.4, BT.1886), others an offset scale such as −3 to +3 where 0 is the default. For films in a dark room, BT.1886 or 2.4 in the Filmmaker, Movie or Cinema mode is the accurate choice; in a bright room, 2.2 keeps shadows visible.
Getting different results in different browsers? Chrome, Edge and Safari convert page colors to your display’s color profile; Firefox by default only does that for tagged images. If your monitor has a custom ICC profile with its own gamma correction, the readings can differ between browsers. The most consistent result comes from the monitor’s own sRGB or 2.2 setting with no correction profile.
Gamma standards at a glance
| Standard | Gamma | Used for |
|---|---|---|
| sRGB | ≈ 2.2 (piecewise: a short linear segment near black, then 2.4 power) | Web, Windows and macOS desktop, games, most photos |
| Gamma 2.2 | 2.2 power curve | The usual monitor target; slightly deeper near black than sRGB |
| BT.1886 | ≈ 2.4 on a display with very deep black | HD and 4K SDR video mastering, dark-room viewing |
| DCI-P3 (cinema) | 2.6 | Digital cinema projection |
| Gamma 1.8 | 1.8 | Old Mac default before Mac OS X 10.6 (2009); no longer standard |
Gamma is only one part of a correct picture. If shadows or highlights are clipped, the gamma reading will be off too — set brightness and contrast first, then check gamma.
Frequently asked questions
What gamma should my monitor be set to?
2.2 for general use, the web, games and photo editing — it is what Windows, macOS and nearly all web and game content assume (the sRGB standard is very close to 2.2). For watching films in a dark room, 2.4 (the BT.1886 video standard) gives deeper, richer shadows. Settings like 1.8 or 2.6 are for special workflows only.
How do I read the gamma chart?
Sit back or squint until the fine lines in each column blur into a flat tone. Somewhere up the column, the solid strip in the middle disappears into the lines. Read the number on the scale at that height: that is your gamma at that brightness level. If the strip blends in near 2.2, your monitor is set correctly.
Why do the 50%, 25% and 10% columns show different values?
Real displays don’t follow one perfect curve. The 50% column measures gamma in bright tones, 25% in mid-tones and 10% in the shadows. Readings within about ±0.1 of each other are normal. A much lower value at 10% usually means a shadow-boost feature (Black Equalizer, Black Stabilizer, Shadow Boost) is lifting dark tones.
Why does the pattern flicker or show moiré?
The lines are one physical pixel tall. If your browser zoom isn’t 100% or your display scaling is fractional (125%, 150%), they can’t line up with real pixels and turn into a shimmering or uneven pattern — the test warns you when this happens. Press Ctrl+0 (⌘+0 on Mac) to reset zoom. Some panels also flicker slightly on fine line patterns; looking from further away helps.
Is the gamma test accurate on a laptop or a phone?
It works, with two caveats. Look straight at the screen: TN and VA panels (and many laptops) change gamma noticeably as your viewing angle changes, so the reading at the top of the screen can differ from the bottom. And phones and laptops often use 2× or 3× pixel ratios with scaled layouts — the result is still valid as long as no scaling warning appears.
My gamma reads 2.2 but games and videos look washed out in Windows HDR mode. Why?
With HDR switched on, Windows displays SDR content using the piecewise sRGB curve rather than a pure 2.2 power curve, which lifts the darkest shadows. That is how Windows is designed, not a monitor fault. Turn HDR off for SDR work, or use HDR only for HDR games and video.
Can a web page measure gamma exactly?
Not like a colorimeter can. This test uses your eye as the meter: it compares a pattern whose average light is known exactly with solid gray levels. That is reliable to within roughly ±0.1 when the lines map 1:1 to pixels. For exact measurements across the whole grayscale you need a colorimeter and calibration software.
Last updated . Runs entirely in your browser — nothing is uploaded.